United States
Organelle-ID™ RGB reagent IV for microscopy
Mixture of fluorescent dyes for detection of lysosomes, endoplasmic reticulum and nucleic acids
| ENZ-53009-C200 | 200 µl | 319.00 USD |  |
||
The Organelle-ID RGB™ Reagent IV is a mixture of cell-permeable red fluorescent endoplasmic reticulum dye, green fluorescent lysosomal dye and blue fluorescent nucleic acid dye. The staining pattern arising from the combination of these three dyes permits visualization of the target organelles by fluorescence/confocal microscopy. The reagent, supplied as a 500X solution, is sufficient for 1000 microscopy assays. The single-tube format makes this multi-organelle stain reagent easy to use.
Product Specification
| Quantity: | 200μl (for 1000 microscopy assays) |
| Purity: | ≥93% (HPLC) |
| Short Term Storage: | -20°C |
| Long Term Storage: | -80°C |
| Handling: | Avoid freeze/thaw cycles. Protect from light. |
| Background / Technical Information: | Wavelength Maxima: Endoplasmic Reticulum(Red): Excitation: 580 nm Emission: 677 nm Lysosomal (Green): Excitation: 481 nm Emission: 544 nm Nuclear (Blue): Excitation: 350 nm Emission: 461 nm The Organelle-ID RGB™ Reagent IV is a member of the CELLestial® product line, reagents and assay kits comprising fluorescent molecular probes that have been extensively benchmarked for live cell analysis applications. CELLestial® reagents and kits are optimal for use in demanding cell analysis applications involving confocal microscopy, flow cytometry, microplate readers and HCS/HTS, where consistency and reproducibility are required. |
| Protocol: | Wide Field Fluorescence/Confocal Microscopy: Reagent Preparation: Mix 2 μL of Organelle-ID RGB™ Reagent IV in 1 mL of buffer of choice. This volume is sufficient for 10 assays and may be scaled according to need. Staining Adherent cells: 1. Grow cells directly onto glass slides or polystyrene tissue culture plates until ~80% confluent via standard tissue culture practices. 2. Remove growth media. 3. Dispense the freshly diluted staining solution in a volume sufficient for covering the cell monolayer. 4. Protect samples from light and incubate for 30 minutes at 37°C. 5. Remove the excess staining solution and, if necessary, add a few drops of buffer to prevent the cells from drying out. 6. Cover cells with a glass cover slip and observe under a fluorescence/confocal microscope with a filter set for DAPI (Ex/Em: 350/470nm), Texas Red (Ex/Em: 540/605 nm) and GFP/FITC (Ex/Em: 488/514 nm). Staining Non-Adherent Cells: 1. Grow the cells via standard tissue culture practices. 2. Collect about 1 x 105 cells. Centrifuge at 500 x g for 5 minutes. Remove supernatant. 3. Re-suspend cells in a volume of the freshly diluted staining solution sufficient for covering the cell pellet. 4. Protect the samples from light and incubate for 30 minutes at 37°C. 5. Centrifuge at 500 x g for 5 minutes. Remove supernatant. 6. Re-suspend the cells in 100 µl buffer. 7. Plate 10-15 µL of cells on a glass slide. 8. Cover cells with a glass cover slip and observe under a fluorescence/confocal microscope with a filter set for DAPI (Ex/Em: 350/470nm), Texas Red (Ex/Em: 540/605 nm) and GFP/FITC (Ex/Em: 488/514 nm). |
General Literature References
Constitutive expression of the machinery for programmed cell death: M. Weil, et al.; J. Cell Biol. 133, 1053 (1996), Abstract;
Principles and Methods of Toxicology, Third Edition.: A. W. Hayes, Ed.; Raven Press 1231 (1994), Book,
Product Toolbox
PRODUCT RESOURCES
Print as PDFMSDS
Certificate of Analysis
RELATED PRODUCTS
By catalog section:
By biological activity:
Organelle DyeEndoplasmic reticulum Dye
Lysosome Dye
Nucleus Dye
PRODUCT SUPPORT
Technical ServiceBulk Quantity Quote
Customer Service
Related Literature
Product Flyers
Visualize Cellular Responses with Cellestial® Fluorescent Probes
 |
18-Feb-13 |
| Download as PDF | |
Catalogs
Screen-Wellâ„¢ COMPOUND LIBRARIES
 |
19-Oct-11 |
| Download as PDF | |
Catalogs
CELLestialâ„¢ Fluorescent Probes and Labeling Products Catalog
 |
23-Mar-09 |
| Download as PDF | |
